• STAGE 2
  • PORTWORX IN THE POCKET AND GASKET
    AREAS FOR IMPROVED FLOW
  • bowl port and polish
  • gasket match intake and exhaust
  • blend valve seats for improved flow
  • cylinder head deburred
  • CUSTOM competition valve grind
  • complete assembly
  • $700.00     
  • STAGE 3
  • THE BEST RACE PACKAGE FOR STREET AND
    STRIP USE
  • FULL EXTENSIVE PORT RUNNER WORK
  • INTAKE AND EXHAUST GUIDES RESHAPEN
    FOR MAXIMIZED PERFORMANCE
  • competition port and polish
  • reshapen guides and bosses
  • knife edge port splitters
  • 5 angle CUSTOM  valve grind

  • $1300.00
LT1  GRIND WITH PERFORMANCE VALVE TRAIN
BOWL HOG  AND CUT SEATS
CUSTOM GRIND
2.02 AND 1.600 STAINLESS  VALVES
3200 VALVE SPRINGS .550 LIFT
CHROME MOLY RETAINERS
ROCKER STUDS AND GUIDEPLATES
RESURFACE
ASSEMBLED    $600.00
  • STAGE 1
  • complete tear down
  • visual inspection of head
  • magna flux or pressure test
  • check valve train for wear and
    tolerances
  • CUSTOM  valve grind
  • surface cylinder head
  • hand lap valves
  • new valve stem seals
  • complete assembly
  • $ 400.00
BOWL HOG THE SEATS  FOR MAX AIR FLOW
CUT THE SEATS FOR 2.02 OR 1.940 AND 1.600 VALVES
CUSTOM PERFORMANCE GRIND
MACHINE FOR SCREW IN STUDS AND GUIDE PLATES SBC ONLY
ASSEMBLE WITH NEW ERSON STAINLESS VALVES
ERSON SPRINGS SET UP TO .550 LIFT  130#@1.800
CHROME MOLY RETAINERS
POSITIVE METAL CLAD SEALS
GASKET MATCH INTAKE
RESURFACE TO CUSTOMER SPECS   SBF $450.00  SBC $500.00  
CUSTOM WORK AND SPRINGS LIFTS     CALL US 765-537-9900        
                 

GRIND VALVES  <PERFORMANCE GRIND>
CHECKING SPRINGS <BERCO DIGITAL>
SET SPRINGS TO CAM LIFT
NEW SEALS TEFLON
RESURFACE IF NEEDED
REASSEMBLY

$ 250.00
765-537-9900
765-537-9900
2200 SOUTH ST ROAD 67
PARAGON INDIANA 46166
BRYFIELDS@YAHOO.COM
COMPETITION
HEAD WORK

Disassemble race heads and mag   — 40.00
Clean aluminum heads ———— 60.00
Street/Perf valve job ————-- 150.00
Competition  CUSTOM Multi-angle
valve job —————————-- 230.00
Assemble & Set installed height 65.00
CUSTOM PORTING ESTIMATE
Back-cut valves ea.——————- 3.00
Cut for teflon seals —————— 40.00
Cut for over-size springs
diameter only ————————- 65.00
Machine for screw-in studs —— 150.00
Machine for oversize valves —--150.00
Drill steam holes SBC — iron — 50.00
Drill steam holes — aluminum —75.00
Pin rocker studs w/pins ——— 50.00
REPLACE GUIDES
One ———--each —————- 20.00
2-4 ———— each ——————15.00
5 or more —-each ——————- 7.50
REPLACE SEATS
1 includes set up 25.00
5 or more - each —————— 12.50
Aluminum heads
1 includes set up 30.00
2 - 4 ——— each ——–—-—–—20.00
5 or more - each ————
PRICES ARE  NEGOTIABLE
As a custom engine shop we are able to offer In our tradition of quality work we also pay strict
attention to the quality of parts we use to insure we produce a quality product. All of our
machine work and engine building is based upon our customers' personal needs.
765-537-9900
BBC CUSTOM GRIND WITH  PERFORMANCE VALVE TRAIN
BOWL HOG AND CUT SEATS
CUSTOM PORTWORX GRIND
2.190 AND 1.880 STAINLESS VALVES 3/8 STEM
3425  CUSTOM VALVE SPRINGS .650 LIFT
CHROME MOLY RETAINERS
ROCKER STUDS AND GUIDEPLATES
RESURFACE
ASSEMBLED        $750.00
11/32 GUIDES INSTALLED   AND VALVES                  $150.0

                                                                                         
CRANK BALANCING
$175.00 - $225.00
CYLINDER HEAD REBUILDING
ENGINE BUILDING
CUSTOM PERFORMANCE & MACHINE
PUTTING CUSTOM  BACK IN CUSTOMER
I have been building cylinder heads for twenty years.   While building cylinder heads for NASCAR truck and Baja
1000, I crafted my work on cylinder heads.  I always learn new ways to get the optimal out of a set of heads.  I have
my own performance custom grind and porting technique that will wake up a set of heads.  I am personally proud of  
all my engine builds and cylinder head rebuilding  ..Knowing that you have a Custom engine that suits your needs
from drag street , dirt track ,4x4and street /strip combos ,and on passenger and truck .BRYAN FIELDS
PERFORMANCE THAT FLOWS
CUT FOR 1 MM VALVE CALL US
BAD ASS SUPRAS  MAKER
SPECIAL CUSTOM GRIND
EXTENSIVE PORT WORX
KNIFE EDGE RUNNER
CUT FOR 1 M VLAVES
PORTWORX THE INTAKE
RESURFACE
ADJUST VALVES VALVE
SET SPRINGS PRESSURE
READY TO SPOOL
READY TO IMPRESS  1500.00   
CALL 765-357-9900